Вы можете использовать команду net use для пакетных файлов и сценариев, чтобы подключить или отключить диск:
- Чтобы подключить сетевой диск:
- Нажмите Пуск (Start), затем щелкните Выполнить (Run).
- В окне Открыть (Open), наберите cmd.
- Наберите net use x: \\имя компьютера\имя общего ресурса, где x: имя диска, которое Вы хотите назначить на общедоступный ресурс.
- Чтобы отключить подключенный диск:
- Нажмите Пуск (Start), затем щелкните Выполнить (Run).
- В окне Открыть (Open), наберите cmd.
- Наберите net use x: /delete, где x: имя диска общедоступного ресурса.
Подключение сетевого принтера
Воспользуйтесь командой net.exe для установления постоянного соединения. Для этого используйте в командной строке следующий синтаксис
net use lptx \\сервер_печати\общий_принтер /persistent:yes
где x — номер сопоставляемого порта принтера,сервер_печати — сервер, обслуживающий общий принтер, и
общий_принтер — имя общего принтера.Например, для сопоставления порта LPT2 общему принтеру под названием Laser1 на сервере печати Pserver выполните следующие действия.
- Нажмите кнопку Пуск и выберите команду Выполнить.
- В поле Открыть введите команду cmd и нажмите кнопку ОК.
- Введите команду net use lpt2 \\pserver\laser1 /persistent:yes и нажмите клавишу ВВОД.
- В командной строке введите exit и нажмите клавишу «ENTER».
Дополнительные сведения о сопоставлении портов LPT обычными пользователями см. в следующей статье базы знаний Майкрософт:
313644
(http://support.microsoft.com/kb/313644/
)
Пользователи без прав администратора не могут сопоставить порт LPT сетевому принтеру
Net use
Connects
a computer to or disconnects a computer from a shared resource, or
displays information about computer connections. The command also
controls persistent net connections. Used without parameters, net use retrieves a list of network connections.
net use [DeviceName [/home[{Password | *}] [/delete:{yes | no}]]
net use [/persistent:{yes | no}]
\\ ComputerName \ ShareName : Specifies the name of the server and the shared resource. If ComputerName contains spaces, use quotation marks around the entire computer name from the double backslash (\\) to the end of the computer name (for example, "\\Computer Name\Share Name"). The computer name can be from 1 to 15 characters long.
\ volume : Specifies a NetWare volume on the server. You must have Client Service for NetWare installed and running to connect to NetWare servers.
Password : Specifies the password needed to access the shared resource. Type an asterisk (*) to produce a prompt for the password. The password is not displayed when you type it at the password prompt.
/user : Specifies a different user name with which the connection is made.
DomainName : Specifies another domain. If you omit DomainName, net use uses the current logged on domain.
UserName : Specifies the user name with which to log on.
DottedDomainName : Specifies the fully-qualified domain name for the domain where the user account exists.
/savecred : Stores the provided credentials for reuse.
/smartcard : Specifies the network connection is to use the credentials on a smart card. If multiple smart cards are available, you are asked to specify the credential.
/delete : Cancels the specified network connection. If you specify the connection with an asterisk (*), all network connections are canceled.
/persistent: { yes | no } : Controls the use of persistent network connections. The default is the setting used last. Deviceless connections are not persistent. Yes saves all connections as they are made, and restores them at next logon. No does not save the connection being made or subsequent connections. Existing connections are restored at the next logon. Use /delete to remove persistent connections.
/home : Connects a user to the home directory.
net help command : Displays help for the specified net command.
net use e: \\financial\letters
To assign (map) the disk-drive device name M: to the directory Mike within the Letters volume on the \\Financial NetWare server, type:
net use m: \\financial\letters\mike
To connect the user identifier Dan as if the connection were made from the Accounts domain, type:
net use d:\\server\share /user:Accounts\Dan
To disconnect from the \\Financial\Public directory, type:
net use f: \\financial\public /delete
To connect to the resource memos shared on the \\Financial 2 server, type:
net use k: "\\financial 2" \memos
To restore the current connections at each logon, regardless of future changes, type:
net use /persistent:yes
Syntax
net use [{DeviceName | *}] [\\ComputerName\ShareName[\volume]] [{Password | *}]] [/user:[DomainName\]UserName] [/user:[DottedDomainName\]UserName] [/user: [UserName@DottedDomainName] [/savecred] [/smartcard] [{/delete | /persistent:{yes | no}}]net use [DeviceName [/home[{Password | *}] [/delete:{yes | no}]]
net use [/persistent:{yes | no}]
Parameters
DeviceName : Assigns a name to connect to the resource or specifies the device to be disconnected. There are two kinds of device names: disk drives (that is, D: through Z:) and printers (that is, LPT1: through LPT3:). Type an asterisk (*) instead of a specific device name to assign the next available device name.\\ ComputerName \ ShareName : Specifies the name of the server and the shared resource. If ComputerName contains spaces, use quotation marks around the entire computer name from the double backslash (\\) to the end of the computer name (for example, "\\Computer Name\Share Name"). The computer name can be from 1 to 15 characters long.
\ volume : Specifies a NetWare volume on the server. You must have Client Service for NetWare installed and running to connect to NetWare servers.
Password : Specifies the password needed to access the shared resource. Type an asterisk (*) to produce a prompt for the password. The password is not displayed when you type it at the password prompt.
/user : Specifies a different user name with which the connection is made.
DomainName : Specifies another domain. If you omit DomainName, net use uses the current logged on domain.
UserName : Specifies the user name with which to log on.
DottedDomainName : Specifies the fully-qualified domain name for the domain where the user account exists.
/savecred : Stores the provided credentials for reuse.
/smartcard : Specifies the network connection is to use the credentials on a smart card. If multiple smart cards are available, you are asked to specify the credential.
/delete : Cancels the specified network connection. If you specify the connection with an asterisk (*), all network connections are canceled.
/persistent: { yes | no } : Controls the use of persistent network connections. The default is the setting used last. Deviceless connections are not persistent. Yes saves all connections as they are made, and restores them at next logon. No does not save the connection being made or subsequent connections. Existing connections are restored at the next logon. Use /delete to remove persistent connections.
/home : Connects a user to the home directory.
net help command : Displays help for the specified net command.
Remarks
-
Connecting and disconnecting from a network resource
Use net use to connect to and disconnect from a network resource, and to view your current connections to network resources. You cannot disconnect from a shared directory if you use it as your current drive or an active process is using it.
-
Viewing connection information
To view information about a connection, you can do either of the following:
-
Type net use DeviceName to get information about a specific connection.
-
Type net use to get a list of all the computer's connections.
-
Type net use DeviceName to get information about a specific connection.
-
Using deviceless connections
Deviceless connections are not persistent.
-
Connecting to NetWare servers
After you install and run Client Service for NetWare, you can connect to a NetWare server on a Novell network. Use the same syntax that you use to connect to a Windows Networking server, except you must include the volume you to which you want to connect.
-
Using quotation marks
If the ServerName that you supply contains spaces, use quotation marks around the text (that is, "Server Name"). If you omit quotation marks, an error message appears.
Examples
To assign the disk-drive device name E: to the Letters shared directory on the \\Financial server, type:net use e: \\financial\letters
To assign (map) the disk-drive device name M: to the directory Mike within the Letters volume on the \\Financial NetWare server, type:
net use m: \\financial\letters\mike
To connect the user identifier Dan as if the connection were made from the Accounts domain, type:
net use d:\\server\share /user:Accounts\Dan
To disconnect from the \\Financial\Public directory, type:
net use f: \\financial\public /delete
To connect to the resource memos shared on the \\Financial 2 server, type:
net use k: "\\financial 2" \memos
To restore the current connections at each logon, regardless of future changes, type:
net use /persistent:yes
Принтер, подключенный через NET USE, в папке "Принтеры и факсы" НИКОГДА НЕ ПОВЛЯЕТСЯ!!!
Для этого используется скрипт или программа, выполняющая подключение с использованием WMI.
Что-то вроде такого:
код (во всю высоту: 34 строк)
Option Explicit Dim WSHNetwork, Computer, Path, strComputerDN, objSysInfo, objComputer, sPrintPath, PrintLocation Dim objWMIService, colInstalledPrinters, objPrinter Set WSHNetwork = CreateObject("WScript.Network") On Error Resume Next Path = WSHNetwork.ComputerName Set objSysInfo = CreateObject("ADSystemInfo") strComputerDN = objSysInfo.ComputerName Set objComputer = GetObject("LDAP://" & strComputerDN) 'Назначаем необходимый для установки сетевой принтер 'в зависимости от значения поля Location Select Case objComputer.Get("Location") Case "Отдел 1" sPrintPath = "\\server1\HPLaserJ" PrintLocation = "Принтер в Отделе 1" Case "Отдел 2" sPrintPath = "\\server2\HP1100" PrintLocation = "Принтер HP1100 Отдел 2" Case Else MsgBox("Для установки принтера обратитесь к системному администратору.") :WScript.Quit End Select 'Выполняем проверку установленных принтеров Set objWMIService = GetObject("winmgmts:" _ & "{impersonationLevel=impersonate}!\\" & "." & "\root\cimv2") Set colInstalledPrinters = objWMIService.ExecQuery _ ("Select * from Win32_Printer") For Each objPrinter in colInstalledPrinters If PrintLocation = objPrinter.Location Then WScript.Quit End If Next
не удобно будет менять постояно скрип и прописовать в нем имя принтера
код
PrinterName = InputBox("Insert the Name of the printer to be attached.")
хотелосбы также подключать и принтера,вот вчем вопрос возможно ли ето? лпт принтер возможно, а вот сетевой?
а в чем сложности? нафига он тебе в папке принтов?
Неть, если оно надо, то телодвижения такие:
1) Выбрать локальный порт для подключения (например LPT2), если порт физически существует (обычно это LPT1) - его следует отключить аппаратно (скажем в БИОСе)
2) Подключить к нему сетевой принтер (net use lpt2: \\server\printer /persistent:yes)
3) Выполнить установку локального принтера нужного типа на этот порт
